Rust binder + Primer SOPPEC RUST CONVERTER, 500 ML

This rust binder is a dual-function product that acts as a rust stabilizer and primer. It is ideal for renovating corrosion-affected areas on a variety of metal equipment such as machinery, vehicles, fences and frames.

Features:

• Dual function: Acts as a rust stabilizer and primer, providing long-lasting protection.
• Excellent protection: Able to penetrate rust and create a high-quality protective coating.
• Application temperature: Maximum operating temperature up to 80°C, short-term temperature peak up to 150°C.
• Drying time: Can be overcoated after approximately 5 hours (depending on temperature, coating thickness, humidity).
• Overcoating: Can be overcoated after 20 minutes; after the last coat has completely dried, it is recommended to lightly sand the surface to improve adhesion.

Areas of use:

• Machine repair
• Vehicle corrosion removal
• Renovation of metal equipment such as fences and frames

Instructions for use:

1. Preparation: Make sure the surface is clean, dry and free of loose rust or other contaminants. Remove any coarse rust if necessary.
2. Application: Apply the rust converter evenly to the damaged surface with a brush or sprayer.
3. Drying: Allow the product to dry for approximately 5 hours. Drying time may vary depending on environmental conditions.
4. Second coat: If necessary, a second coat can be applied after 20 minutes.
5. Sanding: After complete drying, it is recommended to lightly sand the surface to improve adhesion to subsequent layers of paint.

Precautions:

• Use in a well-ventilated area.
• Avoid contact with skin and eyes.
• Keep out of reach of children.
• Keep away from direct sunlight and heat sources.

This is the ideal solution for long-term protection of metal surfaces and corrosion prevention.